Modern CNC lathes enable the high-precision production of a wide variety of turned parts. Typical machining processes include longitudinal turning and face turning. Using modern machines, components with outer diameters of up to 440 mm and lengths of up to 1,000 mm can be manufactured cost-effectively.
CNC turning is suitable for prototypes and individual parts as well as for small and large production runs across a wide range of industrial sectors.
Professional quality assurance ensures that components and assemblies meet the defined requirements. Defects are detected early, complaints are reduced, and process reliability is increased.
Depending on the requirements, we perform dimensional inspections, geometric inspections, visual inspections, incoming goods inspections, as well as random and serial inspections.
Yes. Upon request, we prepare detailed test reports and documentation to ensure that all test results are traceable and transparent.
Quality control is carried out at our in-house quality center in Herisau. There, experienced and trained employees inspect and approve the components before they are shipped.
Yes. Companies from Germany, Austria, and throughout the EU can easily place orders with part.solutions. Upon request, we invoice in euros (EUR) and deliver directly to your location—for example, DAP (Delivered At Place) in accordance with Incoterms.
Thanks to our experience in the international procurement of drawing parts, CNC-turned parts, milled parts, sheet metal parts, and assemblies, you benefit from a simple, transparent, and secure ordering process—regardless of where your company is located in Europe.
In short: EU customers ordering from part.solutions enjoy the same high standards of quality and service as customers in Switzerland.
Yes. Unless otherwise specified in the quote, our prices include all costs, including delivery to the end customer in Switzerland. There are no additional costs for our customers. For customer deliveries within the EU, we can also handle customs clearance upon request and deliver, for example, DAP (Delivered At Place) directly to your location.
This allows you to benefit from transparent procurement, clear costs, and minimal administrative effort.
In short: You’ll receive the components on time at the desired delivery address—including logistics handling in accordance with the agreed-upon delivery terms.
Quality is our top priority at part.solutions. Depending on the component and requirements, each customer order undergoes inspection both at our qualified suppliers’ facilities and through additional incoming goods and quality control checks at our own quality center in Herisau.
This means every order undergoes a double quality control process. We rely on modern tactile and optical measuring machines to reliably ensure dimensional accuracy and quality.
Our inspection processes are ISO 9001-certified and guarantee traceable and documented quality assurance throughout the entire supply chain. Upon request, we provide inspection reports, material certificates, or initial sample inspections.
In short: Our in-house measurement center, state-of-the-art measurement technology, and ISO 9001-certified processes ensure the highest quality standards for your components.
Thanks to our rigorous quality control, complaints are rare. Through our in-house measurement center, equipped with state-of-the-art tactile and optical measuring machines, as well as our ISO 9001-certified quality management system, we ensure consistently high component quality.
Should a complaint nevertheless arise, we are your direct point of contact. We handle complaints quickly and transparently and manage all coordination throughout the supply chain.
In short: Thanks to our in-house quality control, you benefit from a very low complaint rate—and if the need arises, we handle the entire process. For you, this means dealing with just one point of contact at all times.
Yes, part.solutions offers the right surface treatment as an integral part of component manufacturing. Whether it’s corrosion protection, wear protection, increased strength, or a high-quality aesthetic finish—we coordinate the appropriate processes to suit your material, application, and technical requirements.
We take a holistic approach to manufacturing and surface treatment to ensure that all processes are optimally coordinated.
Possible surface treatments include, among others:
By consolidating manufacturing, surface treatment, quality control, and logistics, you reduce internal coordination efforts, shorten lead times, and minimize procurement risks. This often results in a significant reduction in overall procurement costs.
Our processes are certified to ISO 9001:2015. In addition, we ensure quality through our own incoming goods and final inspections, modern tactile and optical measurement technology, test reports, and documented quality assurance throughout the entire supply chain.
Whether it’s a prototype, small-batch production, or mass production—we support customers in mechanical and plant engineering, medical technology, robotics, electronics, toolmaking, and many other industries in selecting the optimal surface treatment solution.
In short: part.solutions handles the selection, coordination, and quality assurance of the appropriate surface treatment and delivers your components ready for use, tested, and on time.
For the production of custom parts for injection molds, die-casting molds, and fixtures, we coordinate the appropriate manufacturing processes based on specific requirements.
These include, among others:
In addition, we offer the appropriate heat and surface treatments as well as comprehensive quality control.
In short: From individual components to complete tool assemblies, you get all manufacturing processes from a single source.
Yes. With our in-house design department, we support customers right from the development phase of custom parts, tooling components, and assemblies. By involving our design engineers early on, we can often reduce manufacturing effort, costs, and lead times, while improving the service life and functionality of the components.
Through close collaboration between design, manufacturing, quality management, and supplier management, you receive a comprehensive, end-to-end solution from a single source. This reduces interfaces, accelerates project execution, and increases process reliability.
In short: From design through manufacturing to quality inspection, part.solutions supports you as your engineering and manufacturing partner for sophisticated custom parts in mold and toolmaking.
In assembly, multiple individual parts are combined to form a functional unit that is ready for installation. This may include mechanical, electromechanical, or custom components.
With part.solutions, you get a complete solution from a single source—from design support through the manufacturing and procurement of individual parts to assembly, quality control, and on-time delivery of the finished assembly.
In short: You receive a ready-to-use assembly instead of many individual components and suppliers.
Yes. Our in-house design department supports you right from the development phase with the design, optimization, and industrialization of your assemblies.
Among other things, we help with:
Early optimization can reduce costs, shorten delivery times, and improve manufacturability.
We assemble mechanical, electromechanical, and custom assemblies for a wide variety of industries and applications.
These include, among others:
From prototypes to small-batch production and mass production, we tailor assembly, testing, and logistics processes to your specific requirements.
In short: part.solutions delivers ready-to-install assemblies—including design, manufacturing, procurement, assembly, and quality testing—all from a single source.
We support you from the initial idea through 3D CAD design and drawing creation to the production-ready design of components and assemblies. We take materials, manufacturing processes, tolerances, assembly requirements, and economic factors into account right from the development phase to ensure efficient and successful implementation. Thanks to our lean and efficient organization, we complete your project in the shortest possible time and under fair terms.
Our design department uses Autodesk Inventor to create professional 3D CAD models, technical drawings, and manufacturing documentation. Upon request, we also provide support for design modifications, variant development, reverse engineering, and the optimization of existing components and assemblies.
Yes. Upon request, we can support your project beyond the design phase, through manufacturing, procurement, surface treatment, assembly, and quality control. This way, you receive development, design, and implementation all from a single source—with a single point of contact throughout the entire project.
Yes. Upon request, we can work directly within your virtual environment, integrating seamlessly into your existing processes. This allows you to benefit from the support of an experienced design engineer without having to build up additional internal resources.
Our employees work as an extension of your team, while leveraging the infrastructure, expertise, and flexibility of part.solutions. This allows you to benefit from additional engineering capacity, short onboarding times, and efficient project execution.
Typical areas of application include:
In short: You get the flexibility of an external engineering partner combined with the integration and collaboration of an in-house employee.
These processes are primarily used for high-precision components in toolmaking, mold making, and mechanical engineering. Typical applications include:
Even difficult-to-machine and hardened materials can be machined economically and with precision.
Yes. In addition to sink-electric and wire-electric discharge machining, we support you right from the development and design phase. Our in-house design department helps optimize tool components, mold inserts, and custom parts.
In addition, we coordinate:
This way, you receive finished and quality-inspected components from a single source—from design to delivery.
In short: engineering, manufacturing, and quality assurance all from a single source for maximum process reliability and minimal coordination effort.
Through our global manufacturing network, we supply plastic parts for a wide variety of applications and industries.
These include, among others:
Depending on your requirements, we can assist you as early as the development and optimization stages to ensure cost-effective mass production.
Our quality assurance services are suitable for parts manufactured to drawings, precision components, assemblies, prototypes, as well as small-batch and mass production for a wide range of industries. Regardless of whether the components were procured by part.solutions or provided by you, we inspect them according to defined inspection plans and technical drawing specifications.
With our in-house quality center in Herisau, state-of-the-art tactile and optical measurement technology, and ISO 9001:2015-certified processes, we support companies with independent quality assurance and incoming inspection of mechanical components and assemblies.
In short: We reliably inspect your components for dimensional accuracy, quality, and compliance—regardless of the manufacturing process, supplier, or quantity.
Mass production refers to the manufacture of identical components in specified quantities. It is suitable for products that are needed on a regular basis or in large quantities and enables cost-effective production while maintaining consistently high quality.
Depending on the component and manufacturing process, we can produce small, medium, and large production runs. We’ll work with you to determine the most cost-effective solution and select the right manufacturing partner for your needs.
Among other things, we manufacture CNC-milled and CNC-turned parts, as well as other precision mechanical parts made of aluminum, steel, stainless steel, brass, titanium, and various plastics. Depending on the geometry, material, and quantity, we select the optimal manufacturing process for your project.
